The single‑piece masonry hanger is fabricated from 2.0 mm galvanised steel to BS EN 10346 standards, offering a robust connection between timber joists and brick or blockwork. Its wide top flange provides a minimum crushing strength of 2.8 N/mm², suitable for loads on masonry. The hanger features a 75 mm bearing surface and pre‑punched side gussets for 30 × 3.75 mm square‑twist nails. Installation requires the back plate to sit flush against the supporting masonry with at least 675 mm of cured masonry above the flange.

Product Type
Timber to Masonry
Height
175 mm
Width
50 mm
Depth
60 mm
Material
Galvanised Steel